1. How much does it cost?
<Back to the top>

Packages for Radio Station and Personal 
24/7 Audio Streaming

$150 a month for a 16K Audio Stream - 24/7, unlimited concurrent listeners. ($200 Setup Fee)

$200 a month for a 20K Audio Stream - 24/7, unlimited concurrent listeners. ($200 Setup Fee)

If you want to stream at higher rate call for pricing. 

Packages For Church Service Streaming
$75 a month for a 20K Audio Stream - unlimited concurrent listeners.  ($50Setup Fee)

$150 a month for a 32K Audio/Video Stream - limited listeners.  ($100 Setup Fee)

If you want to stream at higher rate call for pricing. 

2. Is there a setup fee?
<Back to the top>

Yes, setup fees can run from $50 to $300 depending on what we are setting up.

3. This is for my church is there any discount?
<Back to the top>

Yes, here are the prices for churches.

Packages For Church Service Streaming
$75 a month for a 20K Audio Stream - unlimited concurrent listeners.  ($50Setup Fee)

$150 a month for a 32K Audio/Video Stream - limited listeners.  ($100 Setup Fee)

If you want to stream at higher rate call for pricing. 

4. What kind of internet connection do I need?
<Back to the top>

That all depends on how you want to stream.
If you Stream from a on demand file like a play list or wma file. It does not matter what kind of Internet connection you have. Because you will be up loading the file to our server. But the slower you connection the long it will take to up load the file.

Now if you are wanting to stream live we recommended that you have one of the following connection.

Cable, ADSL, ISDN, or T-1

5. Do I need a server?
<Back to the top>

No, but if you are streaming live you will need a streaming computer.
We recommend the minimum configuration: 300 MHz processor, such as a Pentium II or AMD.  Windows 98 Second Edition or newer.  128 MB of RAM.  Supported audio capture device (Sound Card).

If you are streaming audio and video live.
We recommend the minimum configuration: 700 MHz dual processor or higher, such as a Pentium III, or a 1.5 gigahertz (GHz) processor or higher, such as a Pentium IV .  Windows 2000.  256 MB of RAM.  Supported audio and video capture device.
 

6. Do I need Any Software?
<Back to the top>

You will need to use Windows Media Encoder 9 to encode and broadcast your stream. If the streaming PC is using Windows 98, use  Windows Media Encoder 7.1 to encode.

If your internet connection is using a dynamic IP address, you will also need to install a free client update utility.  We recommend:
no-ip.com or dyndns.org.

7. If so how much does the software cost?
<Back to the top>

It is free!